1
2
3
4
5
6
7
8
9
10
11
12
7-23
3Pull out the grip of the saddle staple holder toward
you and turn it 90o clockwise in the direction of
the arrow.
4Remove the empty staple case and set a new one.
- Replace both staple cases with new ones.
- Do not remove the seal holding the staples before the staple
case is set in the cartridge.
If test stapling fails to be performed and the following message
remains displayed, repeat the above procedure from steps 1
to 7.
Set staple cartridge
7Close the lower cover of the finisher. Test stapling
is then automatically performed on a blank sheet.
- This operation is carried out to avoid blank stitching.
6Make sure that the finisher is attached to the copier
firmly and that A3, A4-R, B4 size paper is set in the
copier.
- If one of the above paper sizes is not set, test stapling cannot
be performed.
5Return the saddle stitch holder and the saddle stitch
unit to their respective original positions.