1
2
3
4
5
6
7
8
9
10
11
12
2-8 HOW TO MAKE COPIES
Press THICK 1 or THICK 2 depending on the paper quantity
of cover sheet, insertion, tab paper and special sheet. In that
case, ’ ’ or ‘ ’ is displayed in the drawer key corresponding to
that in the paper has been set.
* For example, when inserting 163g/m2 paper, press INSERT
key, and press THICK 1 key.
3Press the drawer key corresponding to that in which
the paper has been set, then press the key of the
paper type newly set.
- If you want to select the COVER , INSERT , or TAB PAPER ,
make sure that paper with the same size as that for the COVER,
INSERT, or TAB PAPER is set in the other drawer including the
optional external LCF (Large Capacity Feeder).
- The setting is completed as shown on the right.
2. SETTING COPY PAPER (Cont.)
Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses(Cont.)
Up to 2 drawers can be set for the sheet insertion.
After having set INSERT 1, press the drawer key corresponding
to that in which the paper for INSERT 2 has been set, and press
the INSERT key.
Clearing the Drawer for Special Uses
Press the drawer key corresponding to that which is
set for the special use, then press the key of the same
mode as the drawer.
- If you clear INSERT 1 when both INSERT 1 and INSERT 2 are
set, the drawer for INSERT 2 changes to INSERT 1.
- Replace the paper set in the drawer as required.
- Press the RETURN key on the touch panel or the JOB STA TUS
key on the control panel to return to the machine to the basic
screen (before JOB STA TUS k e y is pressed on the step 2).