Ld,Lg,Lt-R,Comp | Toshiba e-studio 550/650/810 specification

Hole Punch Unit					Paper weight: 64 - 256g/m2
		Number of punching holes and hole diameter			Available paper size
Japan and most of		2 holes			A3, A4, A4-R, B4, B5, B5-R, FOLIO LD,
Europe (MJ-6003E)		(6.5mm dia.)			LG,LT,LT-R,COMP

North America		2/3 holes switchable			2 holes: LG, LT-R
(MJ-6003N)		(8.0mm dia.)			3 holes: A3,A4LD, LT

France		4 holes			A3, A4,LD,LT
(MJ6003F)		(6.5mm dia.; 80mm pitch)

Sweden		4 holes			A3, A4, A4-R, B4, B5, B5-R, FOLIO
(MJ-6003S)		(6.5mm dia.; 70, 21 mm pitch)			LD,LG,LT-R,COMP
Inserter

Model Name			MJ-7001
Type			Floor Type
Acceptable Paper Size			A3, A4, A4-R, B4, B5, FOLIO, LD, LG, LT, LT-R, COMP
Acceptable Paper Weight			60 - 256g/m2
Maximum Capacity			60 - 80g/m2		- 256g/m2
			100 sheets		Height: approx. 16mm
			* Special paper: 60% less than above
Power Source			Supplied from the copier
Dimensions			533mm(W) x 612mm(D) x 1072mm(H)
Weight			Approx. 20kg
Power Consumption			171W max.
External LCF (Large Capacity Feeder)

Model Name			MP-4003A			9
Type			Floor Type			9
Acceptable paper size			A4
Acceptable paper weight			64 - 209g/m2
Maximum Capacity			3750 sheets (80g/m2)
Power Source			Supplied from the copie

Dimensions			326mm(W) x 599mm(D) x 617mm(H)

Weight			Approx. 40kg

Power Consumption			1.5kW max. (with the copier)

*The paper mentioned above is Toshiba-recommended paper. Specifications and appearance are subject to change without notice in the interest of product improvement.

9-5

Image 172

Toshiba e-studio 550/650/810 manual Ld,Lg,Lt-R,Comp

Contents

Page Page STUDIO550/650/810 Copier model Base model Off Mode Off Mode Default TimeAutomatic Energy Save Default Time Sleep Mode Default Time Toshiba Quality is Second to None Supplies / Parts Toner Toshiba Quality is Second to NoneGeneral Preface Features of the e-STUDIO550/650/810 Preface Table of Contents Table of Contents When the graphic symbols flash on the touch panel Maintenance Disclaimer Notice Precautions Installation Precautions General PrecautionsBe sure to disconnect the power-cord plug Handle and use the copier gently and carefully Explanatory Label Fixing the adjusters stoppers Before Making Copies Main Components Optional Equipment Configuration Optional Equipment Control Panel Timer lamp Function Clear keyStop key Start key Message Display Touch PanelTouch-keys Settings set functions confirmation key Clearing the Functions Selected Turning on the Power Switch/Auto Job Start Turning on the Power SwitchTurning on the Power Switch Turn on the power switch Controlling the Use of the Copier with Department Codes After Copying is Finished Turning on the Power Switch HOW to Make Copies Place the originals General Copying ProceduresPlace the next original 2nd side and press Start key When Coming Across the Situations below Exiting Copy Papers Acceptable Copy Paper Types and Sizes Feeder Paper Type Paper Size Remarks Handling and Storing Paper Pay attention to the following points Setting Copy Paper Changing the Paper Size of the Drawer Setting the Drawer for Special Uses Press the JOB Status key on the control panel If you want to select the Cover , Insert , or TAB Paper Setting Originals Acceptable Original Types and Sizes Setting Originals When Placing an Original on the Glass When Using the Reversing Automatic Document Feeder Exiting Originals Continuous Feed Mode After aligning the edges of originals well, placeThem face up and align the slides to the width Originals Auto JOB Start JOB Preset Confirming and Cancelling Auto Job StartPress the Start key Confirming auto job start Press the Interrupt key Interrupt CopyingReplace the original with a new one. Stopping the Copy Operation Deleting or Changing Order of Pending Jobs Deleting the Job Changing order is completed 18HOW to Make Copies Setting of Basic Copy Modes Paper Selection Automatic Paper Selection APS Manual Paper Selection Press the AMS key Reduction and Enlargement CopyingPlace the originals. Press the Original Size key of the same size as the original Reduction and Enlargement Copying DUPLEXCOPYING1-SIDED,2-SIDED,BOOK-TYPE Duplex Copying 1-SIDED, 2-SIDED, BOOK-TYPE Follow the same procedure 1 to 3 as shown aboveBook-Type Originals 2-Sided Copies Press the Book 2 key Select the book copying type Select A4 or B5 copy size 10SETTING of Basic Copy Modes Copy Density Adjustment Manual Copy Density Mode Copy Density AdjustmentPress Auto on the basic screen Selecting Original Mode Quick Access Menu Using the Editing Functions Providing Right or Left Margin Image ShiftPage2-4 Press the Start key Providing a Bookbinding Margin Edge Erase DUAL-PAGE Place in the drawers Turn to the next page, set the book again and press Scanned Y Zoom Press the lower SET key Image Editing Trimming/Masking Enter the distance values read in for the specified area Area Image Editing Mirror Image Negative/Positive Reversal 2IN1 4IN1 Select the type of the original Press Start key Copying with Annotation Numbering Copying Magazine Sort from the Editing Menu Place paper in the drawers Select the paper type To have copies stapled, press the Staple on Key Cover Copying Select the desired cover sheet key Sheet Insertion Copying Select the number of copies or sets TAB Paper Mode Setting Tab Paper in the DrawerPull the second drawer out Into the slit hole of A4-TAB or LT-TAB Tab Width Adjustment TAB Paper MODECont Key, then adjust the tab extension tab widthShift width then press the SET key Press the Copy on TAB key Press the SET key Tab Paper CopyingPlace tab paper in the drawer or the bypass guide Place tab paper in the drawer or the bypass guide Tab Paper InsertionPress the Blank TAB Insert key Tab Paper Insertion and Copying Press the Copied TAB Insert key Document Storage Press Start key Overlay Stored image starts printing out Overlay Press the Start key Confirming Overlay Test Print Press the Start key Cancelling the Sharpness Adjustment Sharpness AdjustmentPress Soft or Sharp key Direction of Duplex Copy Images Rotation Using the Special Functions Continuous Original Feeding / Single Original Feeding Place an original MIXED-SIZED Originals JOB Memory JOB Memory Key to enter the programme Confirming Stored Copy Modes Bypass Copying Bypass copyingSet sheets of paper on the bypass guide and align Slides with the size of the paper Press the Start key Bypass COPYINGcont Bypass Copying on Standard Size PaperPerform steps 1 to 2 on pages 5-8 Set the Other size key as necessary Bypass Copying on Non-Standard Size Paper Bypass Copying on Non-Standard Size Papercont Key in each dimension, then press the Memory keyStoring a Non-Standard Size in the Memory Weekly Timer Set the ON/OFF times for each day of the week Setting the Other Size KEY Setting has been completed Check that the settings are all correct Setting the Date and TimeSetting the Clock for Daylight Saving Time Setting the Automatic Energy Save Mode Clearing the Automatic Energy Saving Mode Setting the Automatic OFF-MODE Clearing the Off-Mode/Sleep Mode Switching Languages Press the key of the desired language Department Codes Input the master code name, and press the SET key Department CodesMaster code name is displayed in the department number Registration / Change / Deletion of Department Code 22USING the Special Functions Page 24USING the Special Functions Deleting of the selected department code is completed Counter reset is completed Print out department code Entering Letters Entering Letters Example Correct Meeting to Meeting Entering Letters Selecting Finishing Modes Finishing Modes and Finishers Optional Names of the Main Components SORT/GROUP Copying Press the Sort or Group key Staple Sorting Optional Maximum Number of Sheets that can be Stapled Magazine Sort & Saddle Stitch Mode Booklet Mode Available Conditions for Saddle Stitch LT-R Hole Punch Mode Optional Number of punch holes and available paper sizes Inserter Mode Optional Paper Acceptable to Set in the Inserter Setting the Inserter Inserter Mode OPTIONALContPress the Size key Press the Start key Sheet Insertion Using only Staple and Hole Punch Set with the control panel of the inserter 14SELECTING Finishing Modes When the Graphic Symbols Flash on the Touch Panel Description of the Flashing Graphic Symbols ADD Paper Symbol Adding Paper to the DrawersPull the drawer out carefully until it comes to a stop Place the paper in the drawer ADD Paper Symbol Adding Paper to the Tandem LCF Large Capacity FeederPull the tandem LCF out carefully until it comes to a stop Tray B Place the paper on the elevator tray Close the cover of the external LCF Replace Toner Cartridge Symbol Open the front cover Return used toner cartridges to your service technician Replace Toner Cartridge Symbol Additional ExplanationDispose of Used Toner Replace Toner Bag Clear Paper Symbol Connecting with the copierMoving the finisher optional Separating it from the copier Clear Paper Symbol Lift the blue handle second as shown on the right Paper Misfeed inside of the Copier Open the paper feed cover Remove any misfed paper Open the bypass cover Remove any misfed paper Open the exit coverTurn the handle in the direction of the arrow Pull the transfer unit out until it comes to a stop Lift the grip, then turn the knob in the directionArrow to remove any misfed paper 11Remove any misfed paperPage Return the external LCF to its original position Paper Misfeed in the Inserter optionalPull the inserter optional away from the copier Open the cover while lifting the grip Pull down the grip Remove any misfed paper 18WHEN the Graphic Symbols Flash on the Touch Panel Only when the saddle stitch finisher MJ-1018 is installed Counter clockwise.Then Turn it clockwisePush the left-hand knob Adding Staples Optional Close the front cover of the finisher Adding Staples OptionalSaddle Stitch Unit Copier Firmly and that A3, A4-R, B4 size paper is set Removing Jammed Staples Optional Return the staple case to its original position Close the front cover of the finisher Saddle Stitch Unit Removing Jammed Staples Optional Disposing of Accumulated Punched Paper Bits Optional Call Service Symbol / Periodic Maintenance Message Maintenance Weekly Maintenance Power switch ON/OFF statusDaily Inspection Items for Daily Check Simple Troubleshooting Display does not change when keys or icons are pressedCopier does not start Copy density is too low Simple Troubleshooting Copy density is too highCopies are stained Copy images are blurred Specifications & Options STUDIO550/650/810 Specifications Continuous Copying Speed B4, Folio Finishers Specificatons of OptionsTray Loading Capacity LD,LG,LT-R,COMP Packing List Index Numbers Index Finisher Paper Misfeed in the Inserter When Using the Reversing Automatic Document Periodic Maintenance To Service Technicians Kanda NISHIKI-CHO, CHIYODA-KU, TOKYO, 101-8442, Japan