Toshiba G8000 operation manual CRA-1/OL

If your system is equiped with bus strip terminals for the A/C INPUT, BYPASS INPUT, A/C OUTPUT and BATTERY connections, Toshiba recommends using the compression lugs listed in Table 11.4, or their equivalent, for cable terminations for mounting on the bus strip.

5.3 in. (135 mm)

1.97 in.	1.77 in.
(50 mm)	(45 mm)

1.75 in.

(45 mm)

3in.

(77 mm)

FIGURE 11.6 - TERMINAL BUS Detail

table 11.4 Recommended crimp type compression lugs for Bus Strip Terminals

Wire Size	Wire	Recommendation		Crimp tool Required
	Strand			Burndy type Y35 or Y46
	Class	Vendor	Cat. No.	Color Key	Die Index
1/0	B	Burndy	YA25	Pink	12 / 348
	I	Ilsco	CRA-1/OL	Pink	12 / 348
	B	Burndy	YA25-LB	Black	13
2/0	B	Burndy	YA26	Black	13
	I	Ilsco	CRA-2/OL	Black	13
	B	Burndy	YA27-LB	Orange	14 / 101
3/0	B	Burndy	YA-27	Orange	14 / 101
	I	Ilsco	CRB-3/OL	Orange	14 / 101
	B	Burndy	YA28-LB	Purple	15
4/0	B	Burndy	YA28	Purple	15
	I	Ilsco	CRB-4/OL	Purple	15
	B	Burndy	YA29-LB	Yellow	16
300 MCM	B	Burndy	YA30	White	17 / 298
	I	Ilsco	CRA-30OL	White	17 / 298
	B	Burndy	YA32-LB	Red	18 / 324
350 MCM	B	Burndy	YA31L	Red	18
	I	Ilsco	CRA-350	Red	18
600 MCM	B	Burndy	YA36L	Green	22
	I	Ilsco	CRA-600	Green	22

G8000 Series Installation and Operation Manual 33