TOSHIBA OF CANADA LIMITED
Office Product Group
191 McNABB STREET MARKHAM, ONTARIO L3R 8H2
For NEW ZEALAND only
“The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to the network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any is compatible with all of Telecom’s network services.”
“This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designated. Telecom will accept no responsibility should difficulties arise in such circumstances.”
“This equipment should not be used any circumstances which may constitute a nuisance to other Telecom customers.”
“Not all telephones will respond to incoming ringing when connected to the extension socket.”
“This device is equipped with pulse dialling while the Telecom standard is DTMF tone dialling. There is no guarantee that Telecom lines will always continue to support pulse dialling.”
“Use of pulse dialling, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should NOT contact the Telecom Faults Service.”
“This device is intended for
“The call log incorporated in this equipment does not record all answered calls. The call log, therefore may not agree with the Telecom account which may include calls not shown on the log.”
“If a charge for local calls is unacceptable, the ‘Dial’ button should NOT be used for local calls. Only the
TOSHIBA (AUSTRALIA) PTY LIMITED
58 Lunn Avenue,
Mt Wellington 1072
New Zealand.
Phone:
For EU only
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Working environment
From EMC (Electromagnetic Compatibility) point of view, the operation of this product is being restricted in following environments:
Medical Environments: This product is not certified as a medical product according to the Medical Product Directive 93/42/EEC.
Domestic environments (e.g. a private living room with TV / Radio sets in the nearby surrounding area) because this is a so called EMC class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures!
Any consequences resulting from the use of this product in restricted working environments are not the responsibility of TOSHIBA TEC.
The consequences of the use of this product in restricted working environments may be an electromagnetic interference with other devices or machines in the nearby surrounding area. This can result into malfunction including data loss / data error pertaining to this product or the other devices / machines involved in the electromagnetic interference.
Furthermore, for general safety reasons, the use of this product in environments with explosive atmospheres is not permitted.
CE compliance
This product is labelled with the CE mark in accordance with the provisions of the applicable European Directives, notably the Low Voltage Directive 2006/95/EC, the Electromagnetic Compatibility Directive 2004/108/EC and the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC.
CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH,
For a copy of the related CE Declaration of Conformity, please contact your dealer or TOSHIBA TEC.
4 Notice to Users
