4.ADVANCED FUNCTIONS
Mailbox Transmission 65
4 ADVANCED FUNCTIONS
6
Press [BOX NUMBER] to display the entry screen. Key in the box number, and then
press [OK].
If a password has been set to the selected mailbox, key in the password in the same way as the box number.
The box number and the password you specified here are sent to the recipient’s fax machine as SUD (box
number) and SID (password) of the command compatible with the ITU-T standards.
7
Specify the recipient’s fax number.
P.29 “Specifying the recipient”
8
Press [SEND].
P.18 “Basic procedures”
You can cancel the transmission of the original.
P.49 “Canceling the Transmission”
Retrieving an original
You can retrieve an original from the confidential or bulletin board mailbox in the recipient's fax machine.
1
Press the [FAX] button on the control panel.
P.18 “Basic procedures”
2
Press the [ADVANCED] tab, and then press [ITU MAILBOX].
This screen is the same as the one you see when you send the original.
P.64 “Sending an original”
3
In the “BOX TYPE” group, press [CONFIDENTIAL] or [BULLETIN BD]. In the “MODE”
group, press [POLLING], and then [OK].