2 SENDING/RECEIVING A FAX

26 Sending a Fax

RESOLUTION

Set the resolution based on the fineness of the original.
If the recipient’s fax machine is not capable of receiving originals at the same resolution, the resolution is automatically
converted before being sent to the recipient. The higher the resolution is, the longer it takes to send an original.

TX TYPE

Set the fax transmission mode.

ORIGINAL MODE

Set the scanning mode based on the type of the original.
In the TEXT/PHOTO mode or PHOTO mode, transmission time may be longer than that in the TEXT mode.

ORIGINAL SIZE

Set the scan size of the original.
If the recipient’s fax machine is not capable of receiving originals of B5/B5-R size, this equipment may reduce that size
before sending it. To avoid this, when the original to be set is B5 and B5-R size, specify A4 and A4-R size respectively.

EXPOSURE

Set the density at which the original is to be scanned.
STANDARD: This is suitable for an original with regular size text.
FINE: This is suitable for an original with small size text and fine illustrations.
U-FINE: This is suitable for an original with ultra-fine illustrations.
MEMORY TX: Send the original after the scanned data are saved in the memory. Up to 100 transmissions of up to
1000 pages per 1 transmission can be reserved, or up to 50 transmissions when the hard disk is not
installed.
DIRECT TX: Send the original directly as it is being scanned. Once a page has been scanned and sent, the next
page is scanned and sent. Therefore, it takes longer to scan and send all pages. However, you can
confirm on the fly that each page is sent to the recipient.
TEXT: This is suitable for an original with text and line drawings.
TEXT/PHOTO: This is suitable for an original with a mixture of text and photos.
PHOTO: This is suitable for an original with photos.
AUTO: The size of the original is automatically determined before the original is scanned.
For the models below, this function is available only when the RADF is installed.
- e-STUDIO2551C Series
DIFFERENT WIDTH: Select this function to load the originals with different width into the RADF (Reversing
Automatic Document Feeder).
Specified size: The original is scanned at the preset size regardless of its actual size.
AUTO: This equipment automatically detects the contrast of the original, and scans it with the optimum density.
Manual: Press or to set the desired contrast.