Toshiba KV-DVR manual Creating a Motion Area, Activating an Alarm Output on a Motion Event

31

9Post Alarm (SENSOR) – Allows you to record video after a Sensor event has ceased for a specified period of time. This option will only work for cameras set to record from a Sensor Event.

10Post Alarm (MOTION) – Allows you to record video after Motion has stopped for a specified period of time. This option will only work for cameras set to record using Motion Detection

11Pre-Alarm– Allows you to record a section of video just prior to Motion or Sensor activation.

13Full Motion Area – Allows you to set the whole screen as a full motion region.

14Apply to All Channels – Takes the current settings and applies it to all channels.

4.3.1Creating a Motion Area

Creating a Motion Area

1)Place the mouse pointer at the upper left hand corner of the area you want to designate, press and hold down the left mouse button, drag the mouse. Let go of the button when the Motion Area is the size you want it to be.

2)Continue creating as many Motion Areas as you wish (up to 5). You can resize them and move them by dragging the sides and corners of the Motion Area.

Figure 4.3.1

4.3.2Activating an Alarm Output on a Motion Event

Enabling Alarm Output on a Motion Event

1)From the Motion Setup window, select a camera to edit.

2)Configure the camera for Motion.

3)Check the Alarm Output box.

4)Select a Control Output to activate for the selected camera.

5)Select the duration you wish the Control Output to be activated for. When a Motion event occurs.

Figure 4.3.2