44
4.7.7Auto Sequencing
The DVR supports an Auto Sequencing setting which allows the video output device to cycle through user specified camera channels.
NOTE: In order to use the Auto Sequencing feature, an output device must be connected to the DVR unit.
9
1
8
2
7
3
4
5
6
1Active Camera – Active Cameras that will be cycled through the Auto Sequencing shown in yellow.
2Non Active Camera – Non Active Cameras that will be cycled through the Auto Sequencing shown in red.
3Select All – Selects camera all camera divisions.
4Custom Mode –
5Skip 0 FPS Channel – This setting allows the sequencing to skip a channel that contains 0 Frames per second.
6Interval (sec) – Interval (sec) sets the amount of time a given channel will be shown on the output device.
7Select All – Selects all camera channels in the division.
8Individual Select – Selects a specific camera channel.
9Divisions Sections – Allows user to select divisions 1, 4, 9, 16, 7, 10, and 13.
