Toshiba KV-DVR manual Creating and Editing a ‘Special Day’ Schedule, Sensor

39

4.5.7Creating and Editing a ‘Special Day’ Schedule

Creating a ‘Special Day’ Schedule

1)Press the ‘NORMAL DAY MODE’ button to enable the ‘SPECIAL DAY MODE’.

2)Select a day from the calendar by clicking on the CALENDAR drop down list.

3)Highlight the time-blocks within the Recording Schedule Window for the camera(s) you wish to schedule. Once the desired Time-Blocks are highlighted, press a RECORDING MODE button.

4)When you have finished creating the schedule press the ‘SAVE SPECIAL DAY’ button. The special day should now appear as a date within the Special Day Schedules.

Deleting a ‘Special Day’ Schedule

5)Select a Special Day from the Special Day Schedules List and press the ‘DELETE SPECIAL DAY’ button.

4.6Sensor

The Sensor Window allows you to enable, disable and configure Sensors.

1 2 3

	Figure 4.6
Figure 4.6	Sensor

1Type – Selects whether the Sensor will be Normally Open (NO) or Normally Closed (NC).

2Delay (sec) – Adjusts the amount of time (in seconds) to ignore the sensor if it is continuously activated.

3Relay – Selects the Control Output to activate once the Sensor has been tripped.