Operating Basics
Important information for use
Note the following limitations when you write Video DVD:
1.Editing digital video
■Log in with Administrator rights to use MovieFactory.
■Make sure that your computer is running on AC power when using MovieFactory.
■Operate the computer at Full Power. Do not use
■While you are editing DVD, you can display preview. However, if another application is running the preview might not display properly.
■MovieFactory cannot edit or play copy protected content.
■Do not enter sleep or hibernation mode while using MovieFactory.
■Do not operate MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped.
■When recording to a
■CD recorder, JPEG functions,
■While recording video to DVD, please close all other programs.
■Do not run software like a screen saver because it can put a heavy load on the CPU.
■Do not support mp3 decode and encode.
2.Before recording the video to DVD
■When you record DVD disc, please use only discs recommended by the Drive manufacturer.
■Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD.
■Do not perform any of the following actions:
•Operate the computer for any other function, including using a mouse to TouchPad or closing/Opening the LCD panel.
•Bump or cause vibration to the computer.
•Use the Mode control button and Audio/Video control button to reproduce music or voice.
•Open the DVD drive.
•Install, remove or connect external devices, including the following: ExpressCard, SD card, USB device, external display, i.LINK. devices, optical digital devices.
■Please verify your disc after recording important data.
■
■Not support to output VCD and SVCD format.
User’s Manual |
