<When the installation plate is directly mounted on the wall>

1.Securely fit the installation plate onto the wall by screwing it in the upper and lower parts to hook up the indoor unit.

2.To mount the installation plate on a concrete wall with anchor bolts, utilize the anchor bolt holes as illustrated in the above figure.

3.Install the installation plate horizontally in the wall.

FILE NO. SVM-03008

9-2-3. Electrical work

1.The supply voltage must be the same as the rated voltage of the air conditioner.

2.Prepare the power source for exclusive use with the air conditioner.

NOTE:

•Wire type : More than H07RN-F or 245 IEC66 (1.0 mm2 or more)

CAUTION

When installing the installation plate with a mounting screw, do not use the anchor bolt hole. Otherwise the unit may fall down and result in personal injury and property damage.

Installation plate

<Keep horizontal direction>

Anchor bolt

Projection 15 mm or less

Fig. 9-2-4

5 mm dia. hole

7 Mounting screw

∅ 4 x 25s

Clip anchor (local parts)

Fig. 9-2-5

CAUTION

Failure to firmly install the unit may result in personal injury and property damage if the unit falls.

•In case of block, brick, concrete or similar type walls, make 5 mm dia. holes in the wall.

•Insert clip anchors for appropriate mounting screws

7.

NOTE:

•Secure four corners and lower parts of the installation plate with 4 to 6 mounting screws to install it.

CAUTION

•This appliance can be connected to the mains in either of the following two ways.

(1)Connection to fixed wiring :

A switch or circuit breake which disconnects all poles and has a contact separation of at least 3 mm must be incorporate in the fixed wiring. An approved circuit breaker or switches must used.

(2)Connection with power supply plug :

Attach power supply plug with power cord and plug it into wall outlet. An approved power supply cord and plug must be used.

NOTE:

•Perform wiring works so as to allow a generous wiring capacity.

– 44 –

Page 44 Page 46
Page 45
Image 45
Toshiba RAS-13UKV-E2, RAS-13UAV-E2 When the installation plate is directly mounted on the wall, Electrical work
Page 44 Page 46

RAS-13UAV-E2, RAS-13UKV-E2 specifications

The Toshiba RAS-13UKV-E2 and RAS-13UAV-E2 air conditioning units represent a significant step forward in both comfort and energy efficiency. Designed for residential and light commercial use, these models are packed with features that cater to diverse climate control needs while adhering to modern standards of sustainability.

One of the standout features of both models is the implementation of inverter technology. This advanced system allows for more precise temperature control by adjusting the compressor speed based on the ambient temperature requirements. This not only enhances energy efficiency but also ensures a quieter operation compared to traditional air conditioning systems. As a result, users benefit from consistent comfort without the disruptive sounds often associated with cooling units.

The RAS-13UKV-E2 and RAS-13UAV-E2 also feature a high energy efficiency rating, which is crucial for reducing electricity bills. The Seasonal Energy Efficiency Ratio (SEER) is a vital measure of energy efficiency over an entire cooling season. Both units excel in this regard, making them an environmentally friendly choice. This is further supported by Toshiba's commitment to incorporating R32 refrigerant, known for its lower environmental impact compared to older refrigerants.

User convenience is enhanced with integrated smart controls. Both models are compatible with wireless remote control features, allowing for easy adjustments from a distance. This is complemented by programmable settings that let users schedule operation times, ensuring that the units run only when needed, which further optimizes energy consumption.

Design-wise, these air conditioners boast a sleek and modern appearance, making them a visually appealing addition to any room. They are constructed with durable materials that ensure longevity and reliability. Moreover, the filters are designed for easy maintenance, ensuring cleaner indoor air quality and prolonging the lifespan of the unit.

The Toshiba RAS-13UKV-E2 and RAS-13UAV-E2 units also come equipped with advanced air purification technologies. These features help to reduce airborne pollutants and allergens, contributing to a healthier indoor environment. With exceptional cooling and heating capabilities, easy installation, and advanced features, these models are designed to meet the modern user's needs for comfort, efficiency, and health. Overall, they represent an excellent investment in both cooling technology and eco-friendly practices.
Top Page Image Contents