FILE NO. SVM-03008

No.

Part name

"Replacement of temperature sensor for servicing only

Common service parts of sensor TO, TS, TE, TD

Procedures

1)Cut the sensor 100 mm longer than old one.

2)Cut the protective tube after pulling out it (200 mm).

3)Move the protective tube toward the thermal sensor side and tear the tip of lead wire in two, then strip the covering part.

4)Pass the stripped part through the thermal constringent tube.

5)Cut the old sensor 100 mm length on the connector side, and recycle that connector.

6)Tear the lead wire in two on the connector side and strip and covering part.

7)Twist the leads on the connector and sensor sides, and solder them.

8)Move the thermal constringent tubes toward the soldered parts and heat them with the dryer and constring them.

9)Wind the attached color tape round the both terminals of the protective tube when colored protective tube is used.

10)Fix the sensor again.

NOTES:

1)Store the joint part of the sensor and the connector in the electric parts box.

2)Never joint them near the thermal sensor part. Otherwise, it would cause insulation inferiority because of dew drops.

3)When replacing the sensor using the colored protective tube, wind the color tape matching the color of that tube.

Remarks

Thermal

Cutting here

Connector 100

sensor part

200

Cutting here

 

5

 

1

 

0

 

7

Thermal constringent tube

Cutting here

100

15

0

 

7

Soldered part

 

Dryer

Winding the color tape

These are parts for servicing sensors.

Please check that the accessories shown in the right table are packed.

 

Part name

Q’ty

Remarks

 

 

 

 

1

Sensor

1

Length: 3 m

 

 

 

 

2

Sensor Spring (A)

1

For spare

 

 

 

 

3

Sensor Spring (B)

1

For spare

 

 

 

 

4

Thermal constringent tube

3

Including one spare

 

 

 

 

5

Color tape

1

9 colors

 

 

 

 

6

Terminal

3

 

 

 

 

 

– 81 –

Page 81 Page 83
Page 82
Image 82
Toshiba RAS-13UAV-E2, RAS-13UKV-E2 service manual Part name
Page 81 Page 83

RAS-13UAV-E2, RAS-13UKV-E2 specifications

The Toshiba RAS-13UKV-E2 and RAS-13UAV-E2 air conditioning units represent a significant step forward in both comfort and energy efficiency. Designed for residential and light commercial use, these models are packed with features that cater to diverse climate control needs while adhering to modern standards of sustainability.

One of the standout features of both models is the implementation of inverter technology. This advanced system allows for more precise temperature control by adjusting the compressor speed based on the ambient temperature requirements. This not only enhances energy efficiency but also ensures a quieter operation compared to traditional air conditioning systems. As a result, users benefit from consistent comfort without the disruptive sounds often associated with cooling units.

The RAS-13UKV-E2 and RAS-13UAV-E2 also feature a high energy efficiency rating, which is crucial for reducing electricity bills. The Seasonal Energy Efficiency Ratio (SEER) is a vital measure of energy efficiency over an entire cooling season. Both units excel in this regard, making them an environmentally friendly choice. This is further supported by Toshiba's commitment to incorporating R32 refrigerant, known for its lower environmental impact compared to older refrigerants.

User convenience is enhanced with integrated smart controls. Both models are compatible with wireless remote control features, allowing for easy adjustments from a distance. This is complemented by programmable settings that let users schedule operation times, ensuring that the units run only when needed, which further optimizes energy consumption.

Design-wise, these air conditioners boast a sleek and modern appearance, making them a visually appealing addition to any room. They are constructed with durable materials that ensure longevity and reliability. Moreover, the filters are designed for easy maintenance, ensuring cleaner indoor air quality and prolonging the lifespan of the unit.

The Toshiba RAS-13UKV-E2 and RAS-13UAV-E2 units also come equipped with advanced air purification technologies. These features help to reduce airborne pollutants and allergens, contributing to a healthier indoor environment. With exceptional cooling and heating capabilities, easy installation, and advanced features, these models are designed to meet the modern user's needs for comfort, efficiency, and health. Overall, they represent an excellent investment in both cooling technology and eco-friendly practices.
Top Page Image Contents