Description of Operation Circuit | Toshiba RAS-13UKV-E2 specification

8-2. Description of Operation Circuit

•Turning [ON] the breaker flashes the operation lamp. (1Hz)

This is the display of power-ON (or notification of power failure).

•When pushing [START/STOP] button of the remote control, receive sound is issued from the main unit, and the next operations are performed together with opening the vertical air flow louvers.

8-2-1. Cooling operation

(The Remote Control MODE Button is Set to the COOL Position)

•Once the setting is made, the operation mode is memorized in the microcomputer so that the same operation can be effected thereafter simply by pushing [START/STOP] button.

•A cooling operation signal is transmitted to outdoor unit.

•The outdoor unit controls the outdoor fan relay R01, R02 and R03, and the compressor motor speed according to the operation command signal sent from the indoor unit.

•When [FAN] button is set to AUTO, the indoor fan motor operates as shown in Fig. 8-2-1. When

[FAN] button is set to LOW , LOW+ ,

MED , MED+ , HIGH , the motor operates with a constant air flow.

temp.)	° C
	° C
	+3
	+3
(Set−	+2.5				M+
(Set−				*1

temp.)	+2
temp.)	+1.5			*1
				*1

(Room	+1			*1
(Room					L

	+0.5
Set		0
Set					In normal
temp.					In normal
		−	0.5		operation
		−	0.5

NOTE :

*1: Calculated from difference in motor speed of M+ and L, and controlled.

Fig. 8-2-1 Setting of air flow [Fan AUTO]

FILE NO. SVM-03008

(1)Cooling capacity control

•The cooling capacity and room temperature are controller by changing the compressor motor speed according to both the difference between the temperature detected by the room

temperature sensor and the temperature set by

TEMP button and also any change in room temperature.

•When compressor has been activated or reactivated, it operates with Max.41 rps for 2 minutes, with Max.91 rps from 2 minutes to 3 minutes, and with Max.88 rps after 3 minutes passed.

•When room temperature is lower than set temperature, indoor fan motor is operated at fan speed L as shown in Fig. 8-2-1 while the outdoor unit stops.

(2)Prevent-freezing control

If temperature of indoor heat exchanger detected by the indoor heat exchanger sensor is 5° C lower, compressor motor speed is gradually lowered to

prevent freezing of the indoor heat exchanger. If temperature is 7° C or higher, return the operation to the above item (1).

(3)Current release control

The input current of compressor and outdoor fan motor (Precisely inverter main circuit control section) which occupy most of air conditioner input is detected by the outdoor current sensor, and compressor motor speed is gradually lowered so that current value does not exceed 9.0A if current value exceeds 9.0A. When the current value lowers to 8.5A, return the operation to the above item (1).

(A)		Comp. motor
(A)		speed down
value	9.0	speed down
	9.0

Current		Comp. motor
	8.5	speed keep
	8.5

		Normal control
		Fig. 8-2-2

– 26 –

RAS-13UAV-E2, RAS-13UKV-E2 specifications

The Toshiba RAS-13UKV-E2 and RAS-13UAV-E2 air conditioning units represent a significant step forward in both comfort and energy efficiency. Designed for residential and light commercial use, these models are packed with features that cater to diverse climate control needs while adhering to modern standards of sustainability.

One of the standout features of both models is the implementation of inverter technology. This advanced system allows for more precise temperature control by adjusting the compressor speed based on the ambient temperature requirements. This not only enhances energy efficiency but also ensures a quieter operation compared to traditional air conditioning systems. As a result, users benefit from consistent comfort without the disruptive sounds often associated with cooling units.

The RAS-13UKV-E2 and RAS-13UAV-E2 also feature a high energy efficiency rating, which is crucial for reducing electricity bills. The Seasonal Energy Efficiency Ratio (SEER) is a vital measure of energy efficiency over an entire cooling season. Both units excel in this regard, making them an environmentally friendly choice. This is further supported by Toshiba's commitment to incorporating R32 refrigerant, known for its lower environmental impact compared to older refrigerants.

User convenience is enhanced with integrated smart controls. Both models are compatible with wireless remote control features, allowing for easy adjustments from a distance. This is complemented by programmable settings that let users schedule operation times, ensuring that the units run only when needed, which further optimizes energy consumption.

Design-wise, these air conditioners boast a sleek and modern appearance, making them a visually appealing addition to any room. They are constructed with durable materials that ensure longevity and reliability. Moreover, the filters are designed for easy maintenance, ensuring cleaner indoor air quality and prolonging the lifespan of the unit.

The Toshiba RAS-13UKV-E2 and RAS-13UAV-E2 units also come equipped with advanced air purification technologies. These features help to reduce airborne pollutants and allergens, contributing to a healthier indoor environment. With exceptional cooling and heating capabilities, easy installation, and advanced features, these models are designed to meet the modern user's needs for comfort, efficiency, and health. Overall, they represent an excellent investment in both cooling technology and eco-friendly practices.

Toshiba RAS-13UKV-E2, RAS-13UAV-E2 Description of Operation Circuit, Cooling capacity control

Models: RAS-13UAV-E2 RAS-13UKV-E2