Toshiba RAS-13UAV-E2 Indoor unit fixing, Drainage Run the drain hose sloped downwards

9-2-6. Indoor unit fixing

1.Pass the pipe through the hole in the wall, and hook the indoor unit on the installation plate at the upper hooks.

2.Swing the indoor unit to right and left to confirm that it is firmly hooked up on the installation plate.

3.While pressing the indoor unit onto the wall, hook it at the lower part on the installation plate. Pull the indoor unit toward you to confirm that it is firmly hooked up on the installation plate.

Hook here

1

1 Installation plate

	2
Hook	Push
	(unhook)

Fig. 9-2-17

•For detaching the indoor unit from the installation plate pull the indoor unit toward you while pushing its bottom up at the specified parts.

FILE NO. SVM-03008

2.Put water in the drain pan and make sure that the water is drained out of doors.

3.When connecting extension drain hose, insulate the connecting part of extension drain hose with shield pipe.

	Shield pipe
Drain hose	Inside the room	Extension drain hose

Fig. 9-2-20

CAUTION

Arrange the drain pipe for proper drainage from the unit.

Improper drainage can result in dew-dropping.

This air conditioner has the structure designed to drain water collected from dew, which forms on the back of the indoor unit, to the drain pan.

Therefore, do not store the power cord and other parts at a height above the drain guide.

	Wall
	Drain guide
	Space for pipes
Push	Push

Fig. 9-2-18	Fig. 9-2-21
9-2-7. Drainage
1. Run the drain hose sloped downwards.
NOTE:

•Hole should be made at a slight downward slant on the outdoor side.

	Do not form the
Do not rise the	drain hose into
drain hose.	a wavy shape.

50 mm or more

Do not put	Do not put
the drain	the drain
hose end	hose end in
into water.	the drainage
	ditch.

Fig. 9-2-19

– 47 –