1. Names. Namesand functionsand functions
(2) (3) (4) (5)
(1)
(9) | (6) |
(8) | (7) |
(10)
(1)LCD panel
For an explanation of windows displayed, see the next page.
(2)to (5) [F1] to [F4] function keys
The function of each function key varies depending on the window currently displayed.
⇒ Refer to the next page and “8. List of function key functions”
(6)[ESC] key
Each time this key is pressed, modes change from one to another. Also, pressing this key brings you back to the window one level higher in the window hierarchy.
(7)[FWD/REV] key
Each time this key is pressed, the direction of operation changes between forward run and reverse run.
(To use this key, parameter settings need to be changed. ⇒ Refer to page
(8)[RUN] key Starts operation.
(To use this key, parameter settings need to be changed. ⇒ Refer to page
(9)[STOP/RESET] key Stops operation.
(To use this key, parameter settings need to be changed. ⇒ Refer to page
In case the inverter has tripped, pressing this key twice in a row resets the inverter.
* If multiple commands are entered by pressing the three keys [F2], [F3] and [F4] or [ESC], [FWD] and [RUN] in rapid succession, a stop command will be issued instead to stop operation.
(10)Control dial *1
In a menu window, turn the dial clockwise or counterclockwise to select a menu item (the item selected is highlighted) and press the dial to confirm the menu item selected.
Turn the dial clockwise (+) to select an item that follows the item currently selected. Turn the dial counterclockwise
Selecting a menu item by turning the dial clockwise or counterclockwise and confirm the item selected by pressing the dial are referred to as “select/confirm an item.”
