5. Operation in Top View Mode
2 After selecting the position of a figure you want to change, specify/confirm another figure with the control dial.
(In this example, a frequency of 30.0Hz is specified.)
Functions of function keys
The functions keys allow you to select the position or decimal place of each figure (operation frequency) you want to increment or decrement with the control dial.
F1 : Selects the position of hundreds.
F2 : Selects the position of tens.
F3 : Selects the position of ones.
F4 : Selects the first decimal place.
Basic Parameters
FC
Panel frequency
Output frequency |
| 0.0Hz | |
| 30.0Hz |
| |
min=0.0 |
|
| max=60.0 |
×1000 | ×100 | ×10 | ×1 |
F1 | F2 | F3 | F4 |
When you confirm the frequency specified, the screen goes back to the top window of Top View Mode.
To change the frequency during operation
Press the control dial during operation to display the operation panel operation frequency menu and turn the control dial to change the setting.
5.2 Using an EASY key function
The [F1] function key can be used as a substitute for the EASY key on the inverter’s main operation panel. When the name of the function assigned to the [F1] key is displayed in the lower left corner of the window, the [F1] key can be used as the EASY key.
“Quick” | : Function of switching between Quick |
| mode and Standard Setting mode |
| (parameter F750=0) |
“Panel” | : Function of switching between Operation |
| Panel and Remote |
| (parameter F750=2) |
| (When used with a |
“Loc/Rem” : Function of switching between Local and Remote
(parameter F750=2)
(When used with a
Hold setting (parameter F750=3)
*The shortcut key function (parameter F750=1) cannot be used. Even if the parameter is so set, the name of the function is not displayed on the screen.
Top View Mode
FWD | 60.0 Hz | STOP |
|
| 0.0 Hz |
|
|
|
Quick | Lng |
Quick
Panel (When used with a
Loc/Rem (When used with a
