5.Operation in Top View Mode
5.4Performing jog run
When Panel Jog Run is selected (parameter F262=1, CMOd=1), “JOG” is displayed in the lower right corner of the window. When “JOG” is displayed, jog run can be performed using the [F4] key.
The switching to jog run cannot be performed during operation. When switching to Jog Run mode, operation has to be stopped temporarily.
1 Press the [F4] key to carry out jog run.
The jog run frequency is displayed on the screen. (In this example, the operation frequency is set at 5.0Hz.)
Operation continues as long as the [F4] key is pressed, and it stops when the [F4] key is released.
Functions of function keys
F1 : Switches between Quick mode and Standard Setting mode.
F2 : Brings you to the Language selection window.
F4 : Executes a jog run command.
Top View Mode
FWD | 60.0 Hz | STOP |
|
| 0.0 Hz |
|
|
|
Quick | Lng | JOG |
|
|
|
| Top View Mode | |
FWD | 60.0 Hz | JOG |
|
| 5.0 Hz |
|
|
|
Quick | Lng | JOG |
F1 | F2 | F4 |
