8. Operation by a copy function
8. 1 Copy to LCD
Push the F3 key on an initial screen and the copy mode screen is displayed. It is not possible to drive with the [RUN] key in the following 3～5 screen display.
1 Select the memory saving group using the control dial.
2 Select copy direction [Copy to the LCD memory] using the control dial.
3 Display of copy waiting
Copy starts when the [F4] key is input.
4 Display of copy loading（fixed screen）
Copy finishes in 1 minute. When the copy is not completed even if it waits 2 minutes or more, please reset a power supply and copy again.
Note) The status display（
）doesn't rotate when copying it while driving until the copy is completed.
5 Display of copy finish
Return to the copy direction window as above “2” when press the ESC key after copy.
Copy Mode
Group selection
Memory - A
Memory - B
TopInfo
Copy Mode
Memory - A
Copy direction
［Copy to the inverter］ ［Copy to the LCD memory］
Top
Copy Mode
Memory - A
［Copy to the LCD memory］
Waiting
Please push F4 key when starting
TopStart
F4
Copy Mode
Memory - A
［Copy to the LCD memory］
Loading
No w loadin g .
Please wa it f or about 1 min .
Copy Mode
Memory - A
［Copy to the LCD memory］
Finish
Copy was completed normally. Please push
CRC code：6AE3
Top
