8.Operation by a copy function
8.2 Copy to inverter
There is no data in LCD, and copy it to LCD at the time of purchase. (Chap.: 8.1)
Push the F3 key on an initial screen and the copy mode screen is displayed. It is not possible to drive with the [RUN] key in the following 3～5 screen display.
1 Select the memory saving group using the control dial.
2 Select copy direction [Copy to the inverter memory] using the control dial.
It is not possible to copy to the inverter when there is no information in the selected memory. Copy to the LCD first
(ref.: Chapter 8.1).
3 Display of copy waiting
Copy starts when the [F4] key is input
4 Display of copy loading（fixed screen）
Copy finishes in 1 minute. . When the copy is not completed even if it waits 2 minutes or more, please reset a power supply and copy again.
Copy Mode
Group selection
Memory - A
Memory - B
TopInfo
Copy Mode
Memory - A
Group selection
［Copy to the inverter］
［Copy to the LCD memory］
Top
Copy Mode
Memory - A
［Copy to the inverter］
Waiting
Please push F4 key when starting
TopStart
F4
Copy Mode
Memory - A
［Copy to the inverter］
5 Display of copy finish
Return to the copy direction window as above “2” when press the ESC key after copy.
.
Copy Mode
Memory - A
［Copy to the inverter］
Finish
Copy was completed normally. Please push
CRC code：6AE3
Top
