Toshiba S2 manual 27 Removing the Touch Pad board, Installing the Touch Pad

4 Replacement Procedures

4.14 Touch Pad

Removing the Touch Pad

To remove the Touch Pad, first remove the top cover, then follow the steps below:

1.Remove two black M2.5x3 screws securing Touch Pad board FFC cable.

2.Remove FFC cable.

3.Remove one black M2.5x3 screw securing Touch Pad’s frame.

4.Push the Touch Pad’s frame forward and remove the Touch Pad bracket.

Figure 4-27 Removing the Touch Pad board

Installing the Touch Pad

To install the Touch Pad, follow the steps below and refer to the figures in the preceding section:

1.Secure Touch Pad Bracket with one black M2.5x3 screw.

2.Connect the Touch Pad board FFC cable to the Touch Pad, and then secure it with two black M2.5x3 screws.

Tecra A3/S2 Series Maintenance Manual 4-31