Toshiba S2 manual Installing the Battery Pack, Removing a PC Card, Replacement Procedures

4 Replacement Procedures

Installing the Battery Pack

To install the battery pack in the battery bay, follow the steps below and refer to the figure in the preceding section.

WARNING: The battery is a lithium ion battery and can explode if not properly replaced, used, handled or disposed of. Use only batteries recommended by Toshiba as replacements.

1.Slide the battery pack into the battery bay. The battery bay latch will click automatically.

2.Lock the battery pack lock and battery pack release latch to secure the installation.

4.3PC Card

Removing a PC Card

To remove a PC Card, follow the steps below.

1.Push the PC Card’s eject button. The button pops out when you release it.

2.Push the eject button once more to pop the PC Card out slightly.

3.Grasp the PC Card and remove it.

4.Push the eject button back into place, if necessary.

4-8 Tecra A3/S2 Series Maintenance Manual