Toshiba S2 manual TI PCI7411 Card Bus Host Adapter, Hardware Overview, System Unit

1 Hardware Overview 1.2 System Unit

?HRTF 3D positional audio.

?3D Stereo Enhancement.

TI PCI7411 Card Bus Host Adapter

?3.3V operation with 5V Tolerance

?The PCI7411 controller is availble in the 288-terminal MicroStar BGA package(GHK).

?Compliant with

?PCI Local Bus Specification, Revision 2.3.

?PCI Bus Power Management Interface Specification Revision 1.1

?Windows Logo Program 2.0 compliant.

?Intel Mobile Power Guideline 2000.

?Advanced Configuration and Power Interface(ACPI) Specification, Revision 2.0.

?PC 98/99 and PC2001.

?PC Card Standard 8.1.

?1394 Open Host Controller Interface Specification 1.1.

?Provisions of IEEE Std 1394-1995 for a high-performance serial bus and IEEE Std 1394a-2000.

?Interrupt configuration

?Many interrupt modes supported.

?Supports serialized IRQ with PCI interrupts.

?Supports PC Card or CardBus with hot insertion and removal.

?Supports 132-MBps burst transfers to maximize data throughput on both the PCI bus and the CardBus.

?Supports ring indicate , SUSPEN D#, and PCI CLKRUN# protocols and PCI bus Lock(Lock#).

?Fully interoperable with FireWire and i.LINK implementations of IEEE Std 1394.

?Two IEEE Std 1394a-2000 fully compliant cable ports at 100M bits/s, 200M bits/s, and 400M bits/s.

?Universal PCI interfaces compatible with 3.3V and 5V PCI signaling environments.

?1.5V core logic and 3.3V I/O cells with internal voltage regulator to generate 1.5V core Vcc.

?PCI power- management D0, D1, D2, and D3 power states.

?Advanced submicron, low-power CMOS technology.

?Isochronous receive dual-buffer mode.

?Node power class information signaling for system power management.

?PCI burst transfers and deep FIFOs to tolerate large host latency.

?Separate cable bias(TPBIAS) for each port.

?Register access fail interrupt when the PHY SCLK is not active.

1-12 Tecra A3/S2 Series Maintenance Manual