selection, making the specific Xmodem protocol selection arbitrary. The first argument of the xmodem command indicates the mode, and must be set to either “/crc” for Xmodem CRC mode, or “/cs” for Xmodem checksum mode.
As mentioned above, configuration files can be both downloaded and uploaded. The second argument in the xmodem command indicates the action to take, and must be set to either “/d” to download the configuration file from the unit, or “/u” to upload a configuration file to the unit.
Figure 22 shows an example of initiating an Xmodem download in CRC mode. Once the message “The
the “receive” button (
) on the tool bar. Figure 23 shows the dialog box that will appear after clicking the “receive” button. Specify the folder in which to place the received file, select Xmodem as the receiving protocol, and click “Receive”. One last dialog box will prompt the user to name the received file, and then the transfer will begin. This will only take several seconds to complete, and at the conclusion the console will indicate the status of the transfer and return to the entry menu.
Figure 22: “Xmodem” Command Overview and Implementation
42