
Figure 23: HyperTerminal receive file dialog box
When uploading a file, the procedure is similar to downloading. Enter “/u” instead of “/d” for the action parameter of the xmodem command. Once the xmodem upload command is entered, the user will have 30 seconds to click the
“send” button () on the tool bar in HyperTerminal and initiate the Xmodem upload transaction. Upon successful completion of the Xmodem upload, the integrity of the file will be checked and, if valid, will be copied to both the unit’s working memory and flash file system. The previous configuration cannot be recovered (unless a corresponding configuration file exists, of course).
12.3.5 XLTR-200 Information
Main menu selection 5 provides some basic information about the gateway, such as firmware version (see Figure 24).
Figure 24:
43