TP-Link manual TL-WDR4300N750 Wireless Dual Band Gigabit Router

TL-WDR4300N750 Wireless Dual Band Gigabit Router

User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. If you have difficulty with this process, please contact your ISP.

Confirm Password - Enter the password again to make sure that the password is correct.

2)If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure 3-8.A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will register the MAC address of your computer when you access the Internet for the first time via the cable/ADSL modem they offered. If you add a router into your network to share the Internet, the ISP may not recognize the new MAC address of the router and will not offer the Internet connection any more. Therefore, it is necessary to clone the MAC address of the computer to the router.

Figure 3-8 Quick Setup – MAC Clone

If you are visiting the Router from the main computer, please select Yes, and then click Next.

If you are visiting the Router from another computer rather than the main computer, please select No, and then click Next.

Note:

1.It’s strongly recommended that you visit and configure the Router from the main computer.

2.To find the main computer’s MAC, please go to Start > Run on your main computer, type in cmd and press Enter. At the command prompt, enter ipconfig/all and press Enter. The MAC will be displayed as Physical Address, shown in Figure 3-9.

- 13 -