TP-Link TL-WDR4300 manual To add IP & MAC Binding entries, follow the steps below

TL-WDR4300N750 Wireless Dual Band Gigabit Router

Figure 4-104 Binding Setting

MAC Address - The MAC address of the controlled computer in the LAN.

IP Address - The assigned IP address of the controlled computer in the LAN.

Bind - Check this option to enable ARP binding for a specific device.

Modify - To modify or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click the Add New… button or Modify button, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding entry (shown in Figure 4-105).

Figure 4-105 IP & MAC Binding Setting (Add & Modify)

To add IP & MAC Binding entries, follow the steps below.

1.Click the Add New... button as shown in Figure 4-104.

2.Enter the MAC Address and IP Address.

3.Select the Bind checkbox.

4.Click the Save button to save it.

To modify or delete an existing entry, follow the steps below.

1.Find the desired entry in the table.

2.Click Modify or Delete as desired on the Modify column.

To find an existing entry, follow the steps below.

1.Click the Find button as shown in Figure 4-104.

-103 -