TP-Link TL-WDR4900 manual Wireless 5GHz

TL-WDR4900N900 Wireless Dual Band Gigabit Router

Channel Width - Select any channel width from the drop-down list. The default setting is “Auto”, which can adjust the channel width for your clients automatically.

Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select “Auto”, then the AP will select the best channel automatically.

Wireless Security

Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption.

Enable Security (WPA-PSK/WPA2-PSK) – It’s selected by default, with the default PSK password the same as the default PIN code.

No Change - If you chose this option, wireless security configuration will not change!

These settings are only for basic wireless parameters. For advanced settings, please refer to

4.7 Wireless 5GHz.

8.Then you will see the Finish page.

 If you don’t make any change on the Wireless page, you will see the Finish page as shown in Figure 3-15.Click the Finish button to finish the Quick Setup.

Figure 3-15 Quick Setup - Finish

If there is anything changed on the Wireless page, you will see the Finish page as shown in Figure 3-16.Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup.

Figure 3-16 Quick Setup – Finish

- 20 -