TL-WDR4900 N900 Wireless Dual Band Gigabit Router
Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN (internal wired and wireless networks), or on the WAN (Internet).
4.16 Bandwidth Control
Figure 4-95 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 4-95: Control Settings and Rules List. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.
4.16.1Control Settings
Choose menu “Bandwidth Control → Control Settings”, and then you can configure the Egress Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should be less than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type and ask your ISP for the total bandwidth of the egress and ingress.
Figure 4-96 Bandwidth Control Settings
Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can take effect.
Line Type - Select the right type for you network connection. If you don’t know how to choose, please ask your ISP for the information.
Egress Bandwidth - The upload speed through the Internet port.
Ingress Bandwidth - The download speed through the Internet port.
4.16.2Rules List
Choose menu “Bandwidth Control → Rules List”, and then you can view and configure the Bandwidth Control rules in the screen below.
- 98 -
