TP-Link TL-WDR4900 manual Use the Wi-Fi Protected Setup Button

TL-WDR4900N900 Wireless Dual Band Gigabit Router

Figure 4-31 WPS

WPS Status - Enable or disable the WPS function here.

Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the Router can be found in the label or User Guide.

Restore PIN - Restore the PIN of the Router to its default.

Gen New PIN - Click this button, and then you can get a new random value for the Router's PIN. You can ensure the network security by generating a new PIN.

Add device - You can add a new device to the existing network manually by clicking this button.

If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless adapter and Router using either Push Button Configuration (PBC) method or PIN method.

Note:

To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile.

I.Use the Wi-Fi Protected Setup Button

Use this method if your client device has a Wi-Fi Protected Setup button.

Step 1: Press the WPS/Reset button on the back panel of the Router, as shown in Figure 4-32.You can also keep the default WPS status as Enabled and click the Add device button in Figure 4-31.Then choose “Press the button of the new device in two minutes” and click Connect, shown in Figure 4-33.

Figure 4-32

- 50 -