TL-WDR4900

N900 Wireless Dual Band Gigabit Router

4.Click the Save button to save it.

To modify or delete an existing entry, follow the steps below.

1.Find the desired entry in the table.

2.Click Modify or Delete as desired on the Modify column.

To find an existing entry, follow the steps below.

1.Click the Find button as shown in Figure 4-100.

2.Enter the MAC Address or IP Address.

3.Click the Find button in the page as shown in Figure 4-102.

Figure 4-102 Find IP & MAC Binding Entry

Click the Enable All button to make all entries enabled.

Click the Delete All button to delete all entries.

4.17.2ARP List

To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could also configure the items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding entries (shown in Figure 4-103).

Figure 4-103 ARP List

1.MAC Address - The MAC address of the controlled computer in the LAN.

2.IP Address - The assigned IP address of the controlled computer in the LAN.

3.Status - Indicates whether or not the MAC and IP addresses are bound.

4.Configure - Load or delete an item.

-101 -

Page 111
Image 111
TP-Link TL-WDR4900 manual ARP List, To find an existing entry, follow the steps below