
TL-WDR4900 N900 Wireless Dual Band Gigabit Router
Step 3: When the WPS LED is on, the client device has successfully connected to the Router.
Note:
1)The WPS LED on the Router will light green for five minutes if the device has been successfully added to the network.
2)The WPS function cannot be configured if the Wireless Function of the Router is disabled. Please make sure the Wireless Function is enabled before configuring the WPS.
4.7.3Wireless Security
Choose menu “Wireless 5GHz → Wireless Security”, you can configure the security settings of your wireless network.
There are five wireless security modes supported by the Router:
Figure 4-35 Wireless Security
Disable Security - If you do not want to use wireless security, check this radio button. But it’s strongly recommended to choose one of the following modes to enable security.
- 52 -