TL-WR740N
Wireless Lite N Router
¾DTIM Interval - This value determines the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between
¾Enable WMM - WMM function can guarantee the packets with
¾Enable Short GI - This function is recommended for it will increase the data capacity by reducing the guard interval time.
¾Enabled AP Isolation - This function can isolate wireless stations on your network from each other. Wireless devices will be able to communicate with the Router but not with each other. To use this function, check this box. AP Isolation is disabled by default.
) Note:
If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values; otherwise it may result in lower wireless network performance.
4.6.5Wireless Statistics
Choose menu “Wireless → Wireless Statistics”, you can see the MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-24 Wireless Statistics
¾MAC Address - The connected wireless station's MAC address
¾Current Status - The connected wireless station's running status, one of
Disconnected
¾Received Packets - Packets received by the station
¾Sent Packets - Packets sent by the station
- 45 -
