TL-WR740N

Wireless Lite N Router

¾IP Address - The assigned IP address of the controlled computer in the LAN.

¾Bind - Check this option to enable ARP binding for a specific device.

¾Modify - To modify or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click the Add New… button or Modify button, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding entry, shown in

Figure 4-64.

Figure 4-64 IP & MAC Binding Settings

To add IP & MAC Binding entries, follow the steps below.

1.Click the Add New... button as shown in Figure 4-63.

2.Enter the MAC Address and IP Address.

3.Select the Bind checkbox.

4.Click the Save button to save it.

To modify or delete an existing entry, follow the steps below.

1.Find the desired entry in the table.

2.Click Modify or Delete as desired on the Modify column.

To find an existing entry, follow the steps below.

1.Click the Find button as shown in Figure 4-63.

2.Enter the MAC Address or IP Address.

3.Click the Find button in the page as shown in Figure 4-65.

- 75 -

Page 82
Image 82
TP-Link TL-WR740N manual To add IP & MAC Binding entries, follow the steps below