TRENDnet User’s Guide
Open a device on your network to the Internet
This router can provide access to devices on your local area network to the Internet using the Virtual Server, Special Application, method (DMZ NOT recommended).
DMZ
Advanced > DMZ
You may want to expose a specific computer or device on your network to the Internet to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature that makes all the ports and services available on the WAN/Internet side of the router and forwards them to a single IP address (computer or network device) on your network. The DMZ feature is an easy way of allowing access from the Internet however, it is a very insecure technology and will open local area network to greater threats from Internet attacks.
It is strongly recommended to use Virtual Server (also called port forwarding, see
“Virtual Server” on page 39) to allow access to your computers or network devices from the Internet.
1.Make the computer or network device (for which you are establishing a DMZ link) has a static IP address. Signing up for a Dynamic DNS service (outlined in Identify Your Network section page 37) will provide identification of the router’s network from the Internet.
2.Log into your router management page (see “Access your router management page” on page 31).
3.Click on Advanced, and click on DMZ.
4.Select Enable in the DMZ Settings section.
5.Enter the IP address you assigned to the computer or network device to expose to the Internet.
6.To save changes, click Apply.
TEW-811DRU
Virtual Server
Advanced > Virtual Server
Virtual Server (also called port forwarding) allows you to define specific ports (used or required by a specific application) and forward them to a single IP address (a computer or device) on your network. Using this feature is more secure compared to using DMZ (see “DMZ” on page 39) in which DMZ forwards all ports instead of only specific ports used by an application. An example would be forwarding a port to an IP camera (TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on your network to be able to view it over the Internet. To open several ports please refer to “Gaming” section on page 41.
Since most ISPs constantly change your home IP address, to be able to access the Virtual Server port(s) from the Internet it is recommended to setup Dynamic DNS service (outlined in Identify Your Network section page 37).
1.Log into your router management page (see “Access your router management page” on page 31).
2.Click on Advanced, and click on Virtual Server.
3.Select Enable in the Virtual Server Function section.
4.Review the virtual server settings. Click Apply to save settings.
© Copyright 2013 TRENDnet. All Rights Reserved.
39
