TRENDnet User’s Guide |
|
PBC (Software/Virtual Push Button)
Wireless (2.4GHz or 5GHz)> WPS
In addition to the hardware push button located physically on your router, the router management page also has push button which is a software or virtual push button you can click to activate WPS on your router.
1.Log into your router management page (see “Access your router management page” on page 31).
2.Click on the wireless band Wireless (2.4GHz or 5GHz) you would like to configure and click on WPS.
3.To add a wireless device to your network, simply click the Add Enrollee button in the router management page, then push the WPS button on the wireless device (consult wireless device’s User’s Guide for length of time) you are connecting.
PIN (Personal Identification Number)
Wireless (2.4GHz or 5GHz)> WPS
If your wireless device has WPS PIN (typically an
1.Log into your router management page (see “Access your router management page” on page 31).
2.Click on the wireless band Wireless (2.4GHz or 5GHz) you would like to configure and click on WPS.
3.Next to Station PIN, enter the WPS PIN of the wireless device you are connecting and click the Add Enrollee button.
Note: You may need to initiate the WPS PIN on your wireless device first when using this method. Refer to your wireless device documentation for details on the operation of WPS.
© Copyright 2013 TRENDnet. All Rights Reserved.
19
