TRENDnet TEW811DRU manual Product Hardware Features, Rear View

TRENDnet User’s Guide TEW-811DRU

*For maximum performance of up to 867 Mbps use with a 867 Mbps 802.11ac wireless adapter

**Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions

***Printer Control Center utility installation required for each computer in order to access the printer

Product Hardware Features

Rear View

USB Share Port

WPS Button

Gigabit LAN

Ports 1-4 (Black)

•USB Share Port – Connect a USB storage device to share files across your network or connect a USB printer to share printers across your network (Printer Control Center utility required for printer sharing).

•WPS Button (Wi-Fi Protected Setup) – Push and hold this button for 5 seconds to activate WPS. The Power LED will blink when WPS is activated.

•Gigabit LAN Ports 1-4– Connect Ethernet cables (also called network cables) from your router LAN ports to your wired network devices.

•Gigabit Internet Port – Connect an Ethernet cable from your router Internet port to your modem.

•Power Port – Connect the included power adapter from your router power port and to an available power outlet.

•On/Off Power Switch – Push the router On/Off power switch to turn your router “On” (Inner position) or “Off” (Outer position). Available on EU version product only.

•Reset Button (Located on Bottom) – Press and hold this button for 10 seconds to reset the router.

Power Port

Gigabit Internet

Port (Yellow)

On/Off Power Switch (EU only)

Reset Button (Located on Bottom)

© Copyright 2013 TRENDnet. All Rights Reserved.

5