Channel Number | Select a channel for the wireless network of this device. | ||||
|
| ||||
| If you enable "Broadcast SSID", every wireless station located within | ||||
| the coverage of this wireless AP can discover this wireless AP easily. | ||||
Broadcast SSID | If you are building a public wireless network, enabling this feature is | ||||
| recommended. Disabling "Broadcast SSID" can provide better | ||||
| security. |
|
| ||
|
| ||||
| This will enhance the data transfer performance of multimedia | ||||
WMM | contents when they’re being transferred over wireless network. | ||||
| WMM is not available in 11n mode. | ||||
|
| ||||
| The transmission rate of data packets of this wireless AP. The | ||||
Data Rate | wireless AP will use the highest possible selected transmission rate | ||||
| to transmit the data packets if set to Auto. | ||||
|
| ||||
| Click "Show Active Clients" button, then an "Active Wireless Client | ||||
Associated Clients | Table" pops up. You can see the status of all active wireless stations | ||||
| that are connecting to the access point. | ||||
|
| ||||
| Mark the checkbox to clone the MAC address of the device. This | ||||
Enable MAC clone | function is only available when you set this AP as Client mode. You | ||||
| can also manually set the MAC address in LAN setting. | ||||
|
|
|
|
| |
Enable Universal | Mark | this | checkbox to | enable Universal Repeater Mode which | |
allows | the | to repeat the signal of another wireless | |||
Repeater Mode | |||||
access point. Available in AP, Client, or AP+WDS modes only. | |||||
| |||||
|
| ||||
SSID of Extended | When enabling the Universal Repeater Mode, specify an SSID for | ||||
Interface | the extended interface. |
| |||
|
|
|
|
| |
*Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configuration.
3.4.3 Multiple SSID
This is the window that pops up after clicking the 
button.
Select one of the AP, and then click the button “Show”, “Active Wireless Client Table – AP1” windows pops up.
