TRENDnet TPL310AP manual WDS Settings, Items Information MAC Address, Current WDS AP List

stations on the list, click “Delete All” to remove all of them.

* Please click on the Apply Changes button or the Reset button to save/reset the configuration.

3.4.8 WDS Settings

Wireless Distribution System (WDS) mode uses wireless media to connect to other wireless access points. Another term for this feature is wireless point to point or point to multi-point bridging. Wireless access points using WDS mode must be configured to use the same channel number, wireless security type, and wireless security key. Add other WDS enabled wireless access points using their device MAC addresses. This feature is only available when using WDS, AP+WDS, Mesh, or AP+Mesh modes located under Wireless > Basic Settings. To use WDS, you will require at least 2 or more wireless access points that support WDS. Note: WDS is not a wireless standard and connectivity may or may not be estab- lished between different wireless access point devices that support this feature. It is recommended to use the same device model when using this feature.

Items	Information
MAC Address &	Fill in the MAC address that you wish to
Comment	control, and give a definition to it.
	(MAC Address Format: xxxxxxxxxxxx)
Data Rate	The transmit limitation of data packets of this
	wireless AP. The wireless AP will use the highest
	possible selected transmission rate to transmit
	the data packets.
Current WDS AP List	Lists the WDS Settings you have added before.
	Click on the list to change configuration. To
	Delete the station on the list, mark the check
	box in the select item and click the “Delete
	Selected”. If you want to delete all stations on
	the list, click “Delete All” to remove all of them.

* Please click on the Apply Changes button or the Reset button to save/reset the configuration.