3.4.4 Active Wireless Client Table
This is the window that pops up after clicking the 
button. This will display information on wireless currently connected to each SSID including the primary.
3.4.5 Advanced Settings
You can set advanced wireless LAN parameters of this AP.
Note: The settings on this page are intended for more advanced users who have sufficient knowledge of wireless LAN technology. Please do not modify these settings unless you are well aware of the effects on the wireless access point functionality and performance as a result of these changes.
Items | Information | |
|
| |
| This value should remain at its default setting of 2346. If you | |
| experience a high packet error rate, you may slightly increase your | |
Fragment Threshold | fragmentation threshold within the value range of 256 to 2346. | |
| Setting the fragmentation threshold too low may result in poor | |
| performance. | |
|
| |
| Request To Send threshold. This value should remain at its default | |
RTS Threshold | setting of 2347. If you encounter inconsistent data flow, only minor | |
modifications to the value range between 0 and 2347 are | ||
| ||
| recommended. | |
|
| |
Beacon Interval | Beacons are packets sent by an access point to synchronize a | |
|
|
