| the drop list. |
|
|
Enter the | |
| shared key format you select. This field must be |
| filled with character longer than 8 and less than |
| 64 lengths. (The default value is 1234567890ab) |
|
|
* Please click on the Apply Changes button or the Reset button to save/reset the configuration.
3.4.7 Access Control
To restrict the clients of Access authentication of wireless clients by MAC address, set up the access list in this page. If the Wireless Access Control Mode is set to "Allow Listed", only the wireless LAN clients whose MAC addresses are listed in the Current Access Control List will be able to connect to the wire- less access point and all other clients not listed will be denied access. If the mode is set to "Deny Listed", the wireless LAN clients whose MAC addresses are listed in the Current Access Control List will not be able to connect to the wireless access point and all other clients will be allowed access. This fea- ture is only available when using AP, AP+WDS, or AP+Mesh modes located under Wireless > Basic Clicking “Delete Selected” will delete the checked entries in the list.
Clicking “Delete All” will delete all of the entries listed.
Items | Information | |
|
| |
| Click on the drop list to choose the access | |
| control mode. You may select “Allow listed” to | |
Wireless Access Control | allow those allowed MAC addresses or select | |
Mode | “Deny Listed” to ban those MAC addresses | |
| from accessing to this device or select | |
| “Disable”. | |
|
| |
MAC Address & | Fill in the MAC address that you wish to | |
control, and give a definition to it. | ||
Comment | ||
(MAC Address Format: xxxxxxxxxxxx) | ||
| ||
|
| |
| Lists the MAC Access Control Settings you have | |
Current Access Control | added before. Click on the list to change | |
configuration. To Delete the station on the list, | ||
list | ||
mark the check box in the select item and click | ||
| ||
| the “Delete Selected”. If you want to delete all |
