Chapter 3: Wireless Access Point Web Management Interface
3.1Default Configuration Settings
Wireless AP | Setting |
|
|
IP Address / Subnet Mask | 192.168.10.100 / 255.255.255.0 |
|
|
SSID | TRENDnet310 |
|
|
SSID Broadcast | Enabled |
|
|
Mode | Access Point (AP) |
|
|
Channel | Auto |
|
|
Channel Width | 20MHz |
|
|
802.11 Mode | 802.11b/g/n Mixed |
|
|
Security | Disabled |
|
|
Username / Password | admin / admin |
|
|
3.2 Menu Items
Setup Wizard: Quickly configure the basic settings such as IP settings, SSID (Wireless Network Name), and Wireless Security.
Status: Displays the current device status and some basic settings of the device.
Wireless: Configure the wireless parameters such as AP, WDS, Mesh, AP client, and repeater modes. Configure wireless security settings, WPS, access control such as MAC filtering, and wireless scheduling.
TCP/IP Settting: Configure the IP address settings for the local area network or Ethernet port.
Log: Displays the device internal system log or configure the device to send system logs to a remote log server (Syslog).
Statistics: Displays the number of packets transmitted and eceived on the wireless and wired interfaces.
Upgrade Firmware: Upgrade the device firmware.
Save/Reload Settings: Backup configuration, restore from configuration file, and reset the wireless access point settings to factory defaults.
Password: Change the device username and password.
System Time: Set the device system time.
Logout: Logout of the web management interface.
