Wireless
Modulation | OFDM with BPSK, QPSK, 16QAM, and 64QAM |
|
|
Access Point Modes | Access Point (AP) |
| Access Point (AP) Client (wireless adapter) |
| Wireless Distribution System (WDS) |
| Wireless Distribution System (WDS) with Access Point (AP) |
| Mesh |
| Mesh with Access Point (AP) |
| Repeater (using AP mode only) |
|
|
Frequency Band | 2.412GHz ~ 2.472GHz |
|
|
Data Rate*** | 802.11b: 1,2,5.5, and 11Mbps |
| 802.11g: 6,9,12,18,24,36,48 and 54Mbps |
| 802.11n: up to 300 Mbps |
|
|
Security | |
| PSK |
|
|
Antenna | 2 x 2dBi internal printed dipole antennas |
|
|
Channel | 2.4GHz: 1~11 (FCC), 1~13 (ETSI) |
|
|
Output Power | 16dBm typically @ 802.11b |
| 14dBm typically @ 802.11g |
| 13dBm typically @ 802.11n |
|
|
Receiver Sensitivity | 802.11n Typical |
| 802.11g Typical |
| 802.11b Typical |
|
|
*Maximum of 16 adapters (nodes) recommended for streaming video across your network. Additional adapters may decrease performance.
**200Mbps is the maximum theoretical Powerline data rate. Actual throughput will vary depending on environment.
***Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions.
****Networked Powerline devices need to be plugged into power outlets that are on the same elec- trical system.
*****It is not recommended to use this product on electrical systems that use AFCI circuit breakers or plugged into GFI protected outlets as this may cause performance degradation or loss in connectivity.
