OSD Settings Page Functionality continued
Setting | Description | ||
Port Display Duration | Select this setting to change the amount of time the OSD menu is displayed | ||
| after switching functionalities between ports via | ||
| bar will appear at the bottom of the OSD Settings Page, allowing you to | ||
| enter a Port Display Duration between 0 and 255 seconds. The default is 3 | ||
| seconds. A setting of 0 disables this function. | ||
Scan Duration | Select this setting to change the amount of time spent on each port during | ||
| an Auto Scan. A highlight bar will appear at the bottom of the OSD Settings | ||
| Page, allowing you to enter a Scan Duration between 0 and 255 seconds. | ||
| The default is 3 seconds. A setting of 0 disables the Auto Scan function. | ||
Screen Blanker | Select this setting to turn the Screen Blanker function On/Off, and to | ||
| determine whether a password is needed to regain access after the screen is | ||
| blanked. A | ||
| Blanker Password, and Screen Lock. When the Set Timeout field is set to | ||
| Off, you will not be able to access the other two settings. | ||
| Set Timeout: To turn on the screen blanker function, select this setting and | ||
| enter in a value between 0 and 30 minutes. The default is 0, which disables | ||
| the Screen Blanker function. | ||
| Blanker Password: When the Screen Lock setting is On, a password will be | ||
| required to regain access to the KVM in the event the screen is blanked. A | ||
| password can be entered here using a maximum of 8 characters | ||
| When entering a new blanker password, you will first be asked to enter the | ||
| current password. The default password is blank, so just press the [Enter] | ||
| key if this setting has never been changed before. You will then be asked to | ||
| enter the new password twice. | ||
| Screen Lock: This setting determines whether a password is required to | ||
| access the KVM after a screen blank. Choose [Y] and [Enter] to turn it on | ||
| and require a password, or [N] and [Enter] to turn it off. It is turned off by | ||
| default. | ||
Hotkey Command | This setting allows you to enable or disable hotkey functionality. When | ||
Mode | turned Off, you will not be able to access Hotkey Setting Mode to control the | ||
| KVM. When accessed, a highlight bar will appear at the bottom of the OSD | ||
| Settings Page. Press [Y] and [Enter] to turn the hotkey functionality on, or | ||
| [N] and [Enter] to turn it Off. It is enabled by default. | ||
Restore Default | This function is used to restore the KVM’s settings to their default values. | ||
Values | (See page 25 for Factory Default Settings.) Port names, usernames and | ||
| passwords are not affected by this function. When accessed, a highlight bar | ||
| will appear at the bottom of the OSD Settings Page. Press [Y] and [Enter] | ||
| to restore default settings, or [N] and [Enter] to exit without restoring | ||
| default settings. You can also press the [Esc] key to exit this function | ||
| without restoring default settings. | ||
Clear the Name List | This function is used to clear out all of the port names. When accessed, a | ||
| highlight bar will appear at the bottom of the OSD Settings Page. Press [Y] | ||
| and [Enter] to clear all of the port names, or [N] and [Enter] to exit without | ||
| clearing. You can also press the [Esc] key to exit this function without clear- | ||
| ing the port names. | ||
Activate Beeper | This function controls a beeper sound that can be heard when a port is | ||
| changed, Auto Scan is accessed or an invalid entry is made in the OSD. | ||
| When accessed, a highlight bar will appear at the bottom of the OSD | ||
| Settings Page. Press [Y] and [Enter] to turn the beeper function on; or, [N] | ||
| and [Enter] to turn it off. It is turned on by default. | ||
|
|
|
|
|
| 20 |
|
201004198 | 4/23/2010 3:26:54 PM |