•Priority Off: Normal scanning
•Priority On: While scanning, the scanner interrupts every 2 seconds and checks the priority channels in each unlocked system. Priority channels in lower priority key numbered systems (starting from 1) have highest priority. Pri appears when you select this mode.
•Priority Plus: The scanner only scans priority channels in unlocked systems. Pri flashes when you select this mode.
Using the Backlight
Menu
Set Backlight E
• 10 sec The backlight stays on for 10 seconds after
you press
Func
+ 
.
• 30 sec The backlight stays on for 30 seconds after
you press
Func
+ 
.
•Squelch The backlight turns on when the squelch opens then stays on for 5 seconds.
•Keypress The backlight turns on when any key is pressed then stays on for 10 seconds.
•Infinite The backlight turns on when you press Func
+
then stays on until you press Func + 
again.
Pressing any key while the backlight is on extends the
backlight period. Pressing Func is on turns off the backlight.
+
while the backlight
Initializing the Scanner’s Memory
Important! This deletes all preprogrammed data. You cannot restore preprogrammed data that has been deleted.
To initialize the scanner’s memory, turn off the scanner. Then, press 2, 9, and Hold while turning it on.
Other Settings
41
