Selecting System Channel Groups
Within a system, you can assign groups of channels to a group quick key (see “Setting the Group Quick Key” on Page 59).
Follow these steps to activate or deactivate a channel group within a system while scanning.
1.Press Func to hold on the system (or hold Func rotate the scroll control to select the system).
and
2.Continue to hold Func and press the number key corresponding to the channel group you want to activate or deactivate.
Locking/Unlocking Systems
Follow these steps to lock out a system so that it does not scan even if its quick key is selected.
1.While holding down Func , rotate the scroll control to select the system.
2.Continue to hold down Func and press L/O to lock out the system.
3.Repeat Steps 1 and 2 to unlock a system you have previously locked.
Note: You can unlock only one race at a time. When you unlock a race, the scanner automatically locks the other races.
Locking/Unlocking Channels
Follow these steps to lock out a channel so that it does not scan even if its system and channel group are selected.
1.While holding down Func , rotate the scroll control to select the system where the channel is stored.
2.Release Func then press Hold within 2 seconds to hold on the system.
Basic Operation
37
