3.Rotate the scroll control to select the channel you want to lock or unlock.
4.Press L/O to lock or unlock the channel.
You can also lock out an active channel by pressing L/O while the scanner is stopped on the channel.
Temporarily Holding On a System
To temporarily hold on a system, press and hold Func . To hold on a different system, continue to hold Func and rotate the scroll control to select the system. Normal scanning resumes 2 seconds after you release Func .
Holding On a Channel
To hold on a channel, press Hold while the channel is active. To select a different channel, rotate the scroll control. If you scroll past the beginning or end of the current system, the scanner selects channels in the previous or next system. To resume scanning, press Scan.
Note: If the scanner is set to its race mode, you can select only unlocked channels. You can select any channel (locked or unlocked) if the scanner is set to its conventional mode.
Quick-Storing Channels
1.Hold on an existing channel in any system.
2.Enter the frequency you want to store.
3.To
If you enter a frequency then press E, the scanner stores it in the Qck Save Grp group in a system called Qck Save Cnv Sys. These are created if they do not exist. Then, the scanner prompts you to save other channel settings.
If you pressed No in Step 3, the scanner prompts you to select the system and the group where you want to store the frequency.
Basic Operation
38
