Quickly Programming Racing Systems

You can use the menu system to program a racing system (see “Manually Programming Racing Systems” on Page 49). Or you can follow the onscreen prompts as described in this section to quickly program your scanner. These prompts are designed to help you quickly enter a new race from a frequency list purchased at the track (if the system is not already preprogrammed into your scanner). When you complete Steps 5 and 6, almost all cars will use the default settings for the other steps.

1.While scanning, press 0. Then rotate the scroll control to select New Race, then press E.

2.Enter the name of the race, then press E.

Select Race New Race

Name the Race

_

SYS

GRP

3.Enter the first car number (up to 3 digits), then press E.

4.Enter the first driver name (up to 12 characters), then press E.

5.Enter the driver’s frequency, then press E.

6.Set the CTCSS/DCS code, then press E

7.Set the modulation type (Auto is almost always the correct choice), then press E

Enter Car No

_

SYS

GRP

Enter Driver

_

SYS

GRP

Enter Frequency

_

SYS

GRP

Set CTCSS/DCS Off

Set Modulation Auto

Programming Radio Systems

47

Page 47
Image 47
Uniden SC230 owner manual Quickly Programming Racing Systems