Entering/Editing Conventional
Channel Groups
To enter channels in a conventional system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
Edit Group | E |
New Group | E |
The scanner creates a group with a default name of Group nn. nn increments by one for each new group you create within a system.
Refer to the appropriate section to set
•See “Entering/Editing the Group Name” on Page 58
•See “Setting the Group Quick Key” on Page 59
•See “Deleting Groups” on Page 60
•See “Setting System Lockout” on Page 56
•See “Entering/Editing Conventional Channels” on Page 53
Entering/Editing Conventional Channels
Edit Channel | E |
|
New Channel | E | Input Frequency |
Enter the frequency for the channel, then press E. Then, refer to the appropriate section to change a channel setting:
•See “Editing the Channel Name (Conventional Sys- tems Only)” on Page 60
•See “Setting Channel Priority” on Page 61
•See “Setting Channel Alert” on Page 62
•See “Deleting Channels” on Page 65
•See “Copying/Pasting Channels” on Page 66
Programming Radio Systems
53