Using the PC Control and
Cloning Options
Use the included connection cable to connect your scanner to another SC230 scanner or your personal computer.
Menu
Xfer Information | E |
•PC Control Lets you set the baud rate your scanner uses to communicate with a personal computer. See “Connecting Your Scanner to a Personal Computer”.
•WIRED Clone Lets you set your scanner as a master or a slave, letting you transfer programming to or from another SC230 scanner. See “Cloning the Scanner” on Page 43.
•On_Air Clone Lets you clone all programmed data over the air to or from another SC230 scanner.
Connecting Your Scanner to a
Personal Computer
To connect your scanner to a personal computer, you must first set the scanner’s baud rate (the rate at which data is transferred between the scanner and the computer, in bits per second (bps)).
Hint: If you have trouble transferring data between your scanner and your computer, try setting the baud rate to a slower setting.
| Xfer Information | E |
Menu |
PC Control E
•Off The baud rate is not set.
•9600 bps The baud rate is set to 9600 bps.
•19200 bps The baud rate is set to 19,200 bps.
•38400 bps The baud rate is set to 38,400 bps.
•57600 bps The baud rate is set to 57,600 bps.
Other Settings
42
